Has the battery in your garage door opener’s remote died? Well, if it has then it will need to be replaced, but you may be wondering how to change one if you never have. All is not lost! You can find all the information that you need to know to change a battery in a garage door opener right here!
Is It the Battery?
The experts at Discount Garage Door (OKC) (who specialize in garage door opener repair in OKC) While the battery indeed may need to be changed there are a lot of other issues that can occur when a garage door opener is not working. Of, course a majority of the time it will, in fact, be the battery, but it is still important to inspect and take into consideration any other problems that could be causing the garage door opener to not work.
Take a look at this list below to see some of the other possible causes that the garage door opener is not working:
Possible Causes:
The Torsion Springs Are Broken.
If the torsion springs have broken, then there would be sounds coming from the garage door opener. The noise cannot be missed because they are very loud when a torsion spring is broken. If a sound is coming from the garage opener, then this could be a possible cause. Note that torsion springs are meant only to be used a number of times before the completely break.
The Garage Door Is Off Track.
Sometimes just a bump into the garage door can through it completely off track. When this happens, the garage door will not open properly or maybe even not at all. The check is simple by taking a look to see if the door is sliding up and down the track. Easy check and simple fix just by loosening the screws and setting properly. A helping hand will be needed.
A Damaged Photo Eye.
The photo-eye is a safety mechanism that keeps the door from closing down on a person or object. Just some dust can cause the photo eye to malfunction and with time they can get wet or damaged. You can inspect the photo-eye for any visible damage and clear it of any dust or dirt can sometimes fix the problem if it does not have to be replaced.
You can watch this YouTube video for more information on possible damages to the garage door opener.
Possible Broken Cables.
Overtime cable can become loose, broken, or brittle. The bad thing about cables breaking is that anyone in the line of impact when they break can get injured greatly and vehicles can get damage too. Another thing is if the cables are broken a professional will need to install new ones to fix the problem.
Broken torsion springs can lead to broken cables. If the torsion springs are broken you can find information at ddmgaragedoors.com to fix the issue before it becomes a major one.
Broken Gears Can Be A Problem
Over time the gears can start to give way on a garage door. This can cause many problems including the garage door becoming jammed and not opening or closing correctly. There are several causes as to why a gear can go out on a garage door, including time and wear and tear. The installation will need to be done with more than one person, but professionals are highly recommended.
About the Garage Door Opener Battery.
Of course, this is another reason that a garage door opener will not be working as it should or even not at all. The battery has gone out and needs to be replaced. No worries because this job is fairly simple and should not take long at all to do. In just a few simple steps the garage door opener battery can be replaced and back to working properly again.
Take A Look at These Two Simple Steps:
Remove the Non-working Batteries.
Garage door opener batteries will more than likely have their own little compartment that is usually near the control box. The battery chamber will need to open up to remove the old and non-working battery out of it. Once the battery compartment is open simply slide out the old battery. Sometimes a screwdriver will be needed to remove screws that may be holding the battery in place.
Note not all garage door opener battery compartments will be held shut with a screw, just some models.
Time to Replace the Old with New.
Now that the old battery is removed it is now time to insert the brand-new garage door opener battery. All you have to do is make certain that the negatives and positive sides are lined up correctly. If not, then the garage door opener will still not work. After the steps are taken and the battery chamber closed back up a test run can be done to make sure the installation was successful.
Find out more about garage door opener batteries at www.homedepot.com.